Decoupage Plates – An Upcycle Project

Upcycled Plate Chargers using decoupage

I did a guest post on Fizzy Jayne Makes blog back in March for National Craft Month…. here’s the actual post on my blog in case you missed ……

I posted before on decoupage and using it on upcycling projects, you can read about it here. With this project, I had some plate chargers, you know the ones that make an appearance at Christmas.  Well, we had a bunch of these that we never used & I was going to dump, when I thought hmmmm maybe they could be used.  So I decided to try and cover them with some paper and make them seem like they old and vintage looking.

So here’s the plate before – just your regular silver plastic plate charger, nothing fancy with this one.  You can get this in the Euro shop, they are not expensive.

Upcycling - plate chargers to vintage plates

And here’s the after.  I did 4 plates with 4 different looks using napkins on some and scrapbook paper on others.  I wanted the plates to look old and worn, kinda vintage looking.  What do you think?

pcycled Plate Chargers - Tutorial using paper

pcycled Plate Chargers - Tutorial using paper

 

Upcycling - plate chargers to vintage plates

Upcycled Plate Chargers using Napkins & Scrapbook Paper

 

What to know how I did it? Well here’s a little quick recap.

Napkin Plates:

The aim was to make the plates look old & worn, vintage looking ……

  • I cleaned and lightly sanded the plate
  • I painted the plate in white. I did two coats to give it a good coverage.
  • I separated the napkins and only used the first layer – see below, it’s important you only use the first printed layer.  I tore  the pieces  I wanted to use and played around with the design. (On the green plate plate I didn’t tear it up I just carefully placed it on the plate and glued it bit by bit & blended it in.)

NapkinLayersNapkin pieces

 

 

 

 

 

 

 

  • I then used some decoupage glue ( you could use some watered down PVA or mod podge but I find this glue the best with napkins ) and glued the napkin pieces.  They wrinkled in places but I didn’t mind as I think the wrinkles make them look old.

Glue for Decoupage

 

 

 

 

 

 

 

  • At the edges, I used some bitumen and rubbed it along with my finger.  You could use some dark wax but be careful, a little goes a long way.  I used some on the inner rim as well.
  • Next up I used some rice paper (rice paper is a little bit thicker than napkins and easier to use I find ) I had some with “home sweet home” printed on it. I tore around the print and glued this on top of the napkin and lightly sanded it to blend it in.  I used some bitumen on this as well to age it.
  • On the blue plate, I used some gold leaf around the edges
  • I sealed the plates with some clear varnish and lightly sanded them when they were was dry.  I repeated this process until I was happy with the result.  Be careful here as you don’t want the paper to tear. Just lightly sand it!

scrapbook PLATES:

  1. I cleaned and lightly sanded the plate
  2. I soaked the paper in water and peeled off the back, I did this as the paper was a bit too thick to use and it was easier to use if the paper was a bit thinner.
  3. Using some decoupage glue I glued the paper down to the plate and rubbed it into the plates rim and all around.  Now it did wrinkle a bit here and there, but as i wanted it to look a bit old and worn I didn’t mind this. Wrinkles can be good!
  4. Now the paper didn’t cover the plate fully, there was gaps on each side where the paper didn’t cover.  So I used some regular acrylic paint and blended the paint the colour of the paper.  I sanded and distressed this until I got the look I wanted.
  5. Next up, I used some gold leaf.  I just placed the glue on the parts I wanted the gold leaf to appear, this was in and around the edges of the plate. I wanted the plate to look old and that the paper was peeling and coming away.  I used some bitumen to make the paper look old in places as well.  You could use dark wax or even an old tea bag to stain the paper.
  6. I let it to dry and coated it again with the glue to seal it and I lightly sanded it afterwards, the paper part only.  I did this a couple of times to make sure everything blended in together.

Note: these plates are only for decorative purposes, just a wipe of a cloth will keep them clean.

So that’s it, hope you enjoyed the process, if I have left anything out or you need to know more please comment below.

So have you done any upcycling lately?

Till next time!

Enjoy Maura x

 

 

Advertisements

4 thoughts on “Decoupage Plates – An Upcycle Project

  1. fredandpeppersplace says:

    Love these Maura, I think the third one is my favourite though they all look great. I’ve never tried decoupage, my mum used to do it all the time when I was growing up. I’ll know where to come when I’m ready to try it out 😉

    Liked by 1 person

Comments are closed.